Google+

Contoh Soal jadi Hacker

7

March 17, 2008 by Isybel Harto

Untuk mau belajar sebagai seorang HACKER, cobain ini deh….

Yang kita butuhkan adalah sebuah Bootdisk image yang dapat didownload di http://home.eunet.no/~pnordahl/ntpasswd/bd040116.zip. Setelah didownload segera ekstrak dan jalankan file install.bat, tapi sebelumnya masukkan sebuah disket kosong ke dalam floppy disk drive anda. Ketika file install.bat dijalankan, maka sebuah floppy disk yang bootable akan dibuat. Nah, disket inilah yang akan kita gunakan untuk melakukan hack.

 

Setelah bootdisk selesai dibuat, restart komputer anda dengan membiarkan disket tadi tetap di floppy disk drive. Mungkin anda perlu mengatur boot sequence agar ketika booting yang pertama kali diboot adalah floppy disk drive.

 

Bila disket anda berhasil diboot, maka tinggal ikuti petunjuk saja. Berikut adalah cuplikan dari program tersebut : ( komentar saya akan diawali dengan tanda ‘–>’)

 

–> tampilan yang muncul pertama kali

 

****************************************************************

* This utility will enable you to change the password of almost

* any user (incl. administrator) on an Windows NT/2k/XP installation

* WITHOUT knowing the old password.

* The program is now able to actually parse/follow the internal

* registry structure completely.

* There is now support for adding and deleting keys and values.

* Tested on: NT3.51 & NT4: Workstation, Server, PDC.

*            Win2k Prof & Server to SP3. Cannot change AD.

*            XP Home & Prof: up to SP1

* Now also works with syskey, read warnings if applicable.

*

* You may either let the scripts try to figure out your configuration,

* or you may do it manually from the shell prompts.

* Good luck!

 

Press return/enter to continue

 

–> tekan enter

 

* In /etc/main.rc….

Calling scsi.rc to probe for SCSI controllers

Mounting floppy to fetch drivers from /scsi on it

SCSI-drivers found on floppy:

 

BusLogic.o.gz  aic7xxx.o.gz

 

Do you have your NT disks on a SCSI controller?

  y – this will autoprobe for the driver

  n – no, skip SCSI, I have IDE drives

  or give the scsi-driver modules name (without the .o or .gz)

  + optional parameters to go directly for a known driver

 

Probe for SCSI-drivers: [n]

 

–> tekan enter

 

Calling part.rc to select partition

Partitions found on the disk(s):

   Device Boot Start    End      Blocks    Id     System

/dev/hda1   *      1   1859    14932386     7  HPFS/NTFS

 

Probable NT partitions:

/dev/hda1   *      1   1859    14932386     7  HPFS/NTFS

Wnat partition contains your NT installation?

[/dev/hda1] : Enter

FAT: Did not find valid FSINFO signature.

Found signature1 0x66024a1e signature2 0xc88b6602 sector=4.

VFS: Can’t find a valid FAT filesystem on dev 03:01.

mount: wrong fs type, bad option, bad superblock on /deb/hda1,

       or too many mounted fil systems

/dev/hda1 is NTFS.

Trying to mount as readwrite on /mnt

NTFS volume version 3.0.

Success. Mounted NTFS /deb/hda1 on /mnt

Calling path.rc. to select path

What is the full path to the registry directory?

[winnt/system32/config] : 

 

–> tekan enter

 

-rw——-  1 0       0         65536 Jan 15 09:00 AppEvent.Evt

-rw——-  1 0       0         65536 Jan 15 09:00 default

-rw——-  1 0       0         65536 Jan 15 09:00 default.LOG

-rw——-  1 0       0         65536 Jan 15 09:00 default.sav

-rw——-  1 0       0         65536 Jan 15 09:00 netlogon.ftl

-rw——-  1 0       0         65536 Jan 15 09:00 SAM

-rw——-  1 0       0         65536 Jan 15 09:00 SAM.LOG

-rw——-  1 0       0         65536 Jan 15 09:00 SecEvent.Evt

-rw——-  1 0       0         65536 Jan 15 09:00 SECURITY

-rw——-  1 0       0         65536 Jan 15 09:00 SECURITY.LOG

-rw——-  1 0       0         65536 Jan 15 09:00 software

-rw——-  1 0       0         65536 Jan 15 09:00 software.LOG

-rw——-  1 0       0         65536 Jan 15 09:00 software.sav

-rw——-  1 0       0         65536 Jan 15 09:00 SysEvent.Evt

-rw——-  1 0       0         65536 Jan 15 09:00 system.sav

-rw——-  1 0       0         65536 Jan 15 09:00 TempLey.LOG

-rw——-  1 0       0         65536 Jan 15 09:00 userdiff

-rw——-  1 0       0         65536 Jan 15 09:00 userdiff.LOG

Which hives (files) do you want to edit (leave default for

password setting, separate multiple names with spaces)

[sam system security] : 

 

–> tekan enter

 

Copying sam system security to /tmp

 

Now running chntpw

chntpw version 0.99.0 030112, (c) Petter N Hagen

Hive’s name (from header) (\SystemRoot\System32\Config\Sam)

ROOT KEY at offset: 0x001020

 

File size 32768 [8000] bytes, containing 7 pages (+ 1 headerpage)

Used, for data: 319/26472 blocks/bytes, unused: 6/1976 blocks/bytes.

Hive’s name (from header): (SYSTEM)

ROOT KEY at offset: 0x001020

 

File size 2555904 [270000] bytes, containing 584 pages (+ 1 headerpage)

Used, for data: 44209/2524072 blocks/bytes, unused: 19/9048 blocks/bytes.

Hive’s name (from header): (SYSTEM)

ROOT KEY at offset: 0x001020

 

File size 49152 [c000] bytes, containing 11 pages (+ 1 headerpage)

Used, for data: 859/42568 blocks/bytes, unused: 5/2136 blocks/bytes.

Hello, this is SAM!

Failed logins before lockout is : 0

Minimum password length         : 0

Password history count          : 0

 

()========() chntpw Main Interactive Menu ()========()

Loaded hives: (sam) (system) (security)

  1 – Edit user data and passwords

  2 – Syskey status & change

      – – –

  9 – Registry editor, now with full write support!

  q – Quit (you will be asked if there is something to save)

 

What to do? [1] -> 

 

–> Nah, karena kita akan mengganti password Administrator maka tekan saja enter

 

==== chntpw Edit User Info & Passwords ====

 

RID: 03f2, Username: (Administrator)

RID: 03f2, Username: (gandhi)

RID: 03f2, Username: (Guest), disabled or locked*

 

Select: ! – quit, . – list users, 0x(RID) – User with RID (hex)

or simple enter the username to change: [Administrator]

 

–> tekan enter (user Administrator yang akan direset)

 

RID     : 032f

Username: Administrator

fullname:

comment :

homedir :

 

Account bits: 0x0215 =

[ ] Disabled      | [ ] Homedir req.      | [ ] passwd not req. |

[ ] Temp. duplicate | [X] Normail account | [ ] NMS account     |

[ ] Domain trust ac | [ ] Wks trust act.    | [ ] Srv trust act   |

[X] Pwd don’t expir | [ ] Auto lockout      | [ ] (unknown 0x08)  |

[ ] (unknown 0x10)  | [ ] (unknown 0x20)    | [ ] (unknown 0x40)  |

 

Failed login count: 0, while max tries is : 0

Total  login.count : 7

Account is disabled

Crypted NT pw : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Crypted LM pw : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

MD4 hash     : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

LANMAN hash  : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

 

* = blank the password (EXPERIMENTAL! but may fix problems)

Enter nothing to leave it unchanged

Please enter new password: *

 

-> Anda akan diminta untuk memasukkan password untuk menggantikan password Administrator, lebih baik anda langsung enter saja, yang berarti passwordnya ditinggalkan kosong.

 

Blanking password. This may actually fix things if previous password-preset

did not work. Or it may even make things worse. Happy joy!

 

Do you really wish to change it? (y/n) [n] 

 

–> ketik y

 

Select: ! – quit, . – list users, 0x(RID) – User with RID (hex)

or simple enter the username to change: [Administrator] 

 

–> ketik !

 

()========() chntpw Main Interactive Menu ()========()

Loaded hives: (sam) (system) (security)

  1 – Edit user data and passwords

  2 – Syskey status & change

      – – –

  9 – Registry editor, now with full write support!

  q – Quit (you will be asked if there is something to save)

 

What to do? [1] -> 

 

–> ketik q

 

Hives that have changed:

 # Name

 0 (sam)

Write hive files? (y/n) [n] : 

 

–> ketik y

 

Calling write.rc to select write back sam file

About to write file(s) back! Do it? [n] 

 

–> ketik y

 

Writing sam

* end of scripts.. returning to the shell..

* Press CTRL-ALT-DELL to reboot now (remove floppy first)

* or do whatever you want from the shell..

* However, if you mount something, remember to umount before reboot

* You may also restart the script procedure with ‘sh /scripts/main.rc’

#

 

Nah, selamat ! Sekarang restart komputer anda dan anda dapat login dengan username Adminisrtator dengan mengosongkan password. Selanjutnya ? terserah anda 😉

 

pesan untuk Korban ANDA :

10*(2*x^2+y^2+z^2-1)^3 – x^2*z^3 – 10*y^2*z^3 = 0

 

“Mathematics is the languange of the Universe”

 

Advertisements

7 thoughts on “Contoh Soal jadi Hacker

  1. dhony says:

    pngen bgt om!!!tolongin aku!!

  2. cheriatna says:

    blog berkesan, teruslah menulis.
    salam dari free contoh rumah

  3. abet says:

    bantuin aku dumz

  4. lukman says:

    hallo, kalau itu mah biasa.
    tapi gimana caranya ya mas, melompati user password xp tanpa harus mereset.???? beritahu gw dong….

  5. esw says:

    nice, and penting gitu…
    thx

  6. azwan says:

    ajarin aku dong gimana caranya jadi hacker sejati.

  7. dieto says:

    Klo cuman gitu sih kita tetep aja bisa ketahuan oleh atasan kita dong…???
    Karna kita telah merubah password yang telah dia buat.
    Ada gak aplikasi yang bisa tahu passwordnya tapi tanpa merubahnya….???

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Statistic

  • 66,000 hits

Publication

Event

March 2008
M T W T F S S
« Jan   Jun »
 12
3456789
10111213141516
17181920212223
24252627282930
31  
%d bloggers like this: